Run PuTTY, select Serial as the Connection type, and enter the COM number (for example, COM3) in the Serial line field.Download and install PuTTY, a terminal emulator for Windows.Select the Port Settings tab and note the Bits per second: value. Right-click on the modem’s entry in the Device Manager list and select Properties.It will show the modem as a USB Serial Device in the Ports (COM & LPT) section. If Minicom posts an error indicating that the device is inaccessible, please check that you’ve connected the modem to your computer and that you copied its device file name correctly. Enter minicom -o -D to open a connection to the module.You should see a single entry like /dev/cu.usbmodem14244201. Install the command-line serial console tool called Minicom using Homebrew with the command brew install minicom.If Minicom posts an error indicating that the device is inaccessible, you may need to try one of the other devices listed in step 3.

Enter minicom -o -D /dev/ttyUSBx to open a connection to the module.

You may also need to ensure you have access to the serial port: on most distributions this can be done by adding your user account to the dialout user group or using sudo. Your modem’s documentation should indicate which one is the modem, but you may need to use trial and error to find it. It’ll be something like /dev/ttyUSBx where x is 0 or above.

Get the modem’s device file with ls /dev/ttytUSB*.

Install the command-line serial console tool Minicom using your operating system’s package manager, such as apt, rpm, dpkg, or similar, e.g., sudo apt install minicom.

Work with the Breakout SDK for Narrowband Get Started with Machine-to-Machine SMS CommandsĪlert: Legacy Data Metering Plans are Deprecated Get Started with the Microvisor Nucleo Development Board How Super SIM Devices Connect to Cell Networks Monitor Super SIM Connection Events using AWS ElasticSearch and Kibanaīest Practices for Cellular Module Registration Set Super SIM’s Network Attach Priority List Get Started with Super SIM Connection Events Get Started with Super SIM eSIM Profiles for eUICCs Get Started with IP Commands and the Pycom GPy Get Started with IP Commands and the Raspberry Pi Pico Get Started with IP Commands and the Raspberry Pi 4 Get Started with SMS Commands and the Raspberry Pi Pico

Get Started with SMS Commands and the Raspberry Pi 4 Get Started with the Raspberry Pi 4 and Sixfab Base Hat Get Started with the Raspberry Pi 4 and Waveshare 4G Hat

At Command Tester Software